Davey
Davey offer a broad choice of dependable submersible sump pumps suited to aerated wastewater treatment systems (AWTS's) ensuring reliability day after day, year after year. They have been operating in Australia for over 65 years exporting their products to over 50 countries.
Busy Bee Wastewater currently stocks D15VA, D25A, D40A, D42A
D15VA
$210.00 includes GST
- The D15VA pump has a delivery of up to 115 l/min, and head up to 6.5m.
- Open impeller vortex, centrifugal design is able to pump small soft solids in suspension and is less susceptible to blockage
- Single Silicon Carbide hard face seals in an oil bath for added motor protection and long service life
- Sand slinger lip seal for added protection and a long and reliable service life
- Corrosion resistant 304 stainless steel shaft, motor shell and fasteners for long service life and an attractive, lasting appearance
- Preset length float switch fitted for unattended operation
- HO7RNF oil resistant leads, 10 metres long with 3 pin power plug easy to connect to power longer life in dirty water.
 Back to top
D25A
$390.00 includes GST
- The D25A pump has a delivery of up to 220 l/min, head up to 9m, and
passes suspended solids up to
10 mm in diameter.
- Open impeller, centrifugal design able to pump soft solids in suspension - Less susceptible to blockage
- Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side - Added motor protection & long service life
- Sand slinger lip seal - Added protection & long service life
- Corrosive resistant 304 stainless steel motor shell and strainer - Long service life & attractive, lasting appearance
- HO7RNF oil resistant leads, 10 metres long with 3 pin power plug for easy connection to power supply & longer life in dirty water
- High quality paint finish
- Automatic resetting thermal overload to protect motor against overloading.
Back to top
D40A
$462.00 includes GST
- The D40A pump has a delivery of up to 240 l/min, head up to 12m, and
passes suspended solids up to
10 mm in diameter.
- Open impeller, centrifugal design able to pump small soft solids in suspension - Less susceptible to blockage
- Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side - Added motor protection & long service life
- Sand slinger lip seal - Added protection & long service life
- Corrosive resistant 304 stainless steel motor shell and strainer - Long service life & attractive, lasting appearance
- HO7RNF oil resistant leads, 10 metres long with 3 pin power plug for easy connection to power supply & longer life in dirty water
- High quality paint finish
- Automatic resetting thermal overload to protect motor against overloading
Back to top
D42A
$497.00 includes GST
- The D42A pump has a delivery of up to 110 l/min, head up to 26m, and
passes suspended solids up to
10 mm in diameter.
- Corrosion resistant 304 stainless steel shaft, motor shell and fasteners for long service life and attractive, lasting appearance
- Centrifugal multistage twin impeller design for higher pressures and increased efficiency
- Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side for added motor protection and long service life
- Closed vane impellers with long engagement 'D' drive for positive operation and service life
- Labyrinth impeller neckrings to maintain pump performance and are less susceptible to wear
- Corrosion resistant hard wearing polycarbonate impellers for a long service life
- Corrosion resistant stainless steel fine mesh screen suction strainer with a large surface area, prevents blockages of the pump by solids
- HO7RNF oil resistant leads, 10 metres long with 3 pin power plug Easy to connect to power supply for a longer life in dirty water.
Back to top
|
